The epoxy gelcoat can be applied as a spray or as a paint. The secret of smooth surfaces. Creates a smooth visible layer, depending on the mold surface. The surface does not require no other treatment after the removal of forms. Suitable for parts of epoxy, after the test also for most polyester and vinylester composites. The surface is created directly in the form. Financial and efficiency savings. For coloring is possible to use a pigment paste for epoxides. Clear gelcoat is possible to paint by a brush, but not when painting is diluted - may damage the separator. For dilution use thinner for epoxy gelcoat spray. For curing use gelcoat hardener H 100 at a ratio 100: 40 (by weight) Recommended max. Gelcoat thickness from 0.05 to 0.2 millimeters. In case of exceeding the max. gelcoat thickness of the coating is soft, and difficult to cure. The gelcoat can be successfully used as a topcoat - paint the conclusion of the inner layer laminates and also for water resistant wood coatings.

Soubory ke stažení

• EG 100 T TL CZ.pdf